The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife quickly and easily, especially in Back or Hip Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily.
Custom Canted Pancake Leather Sheath for Victorinox Hunter Pro Wood Read More »
This custom Buck 112 leather sheath is specially designed for lefthander to horizontal carry the Buck 112 Folding Ranger.This custom sheath allows lefthander to comfortably horizontal carry in different positions in left-side waist line: Appendix Carry (10-11 o’clock, above you left front pocket), Hip Carry (9 o’clock), Back Carry (7-8 o’clock, above you left back pocket), or SOB Carry (Small-of-Back, 6 o’clock),.Features:Comfortable: The ergonomic designed sheath just sit along your waist-line, even if you’re driving or sitting down by the table, you may not feeling that your are carrying a knife sheath.Fast accessibility: Open-top sheath allows quick draw in a second, The ergonomic canted (around 7.5 degrees canted from horizontal line) and the holster-alike sheath helps for quickly and smoothly drawConcealable: the sheath sitting tight against your body along the waist-line, the style adds rigidity and helps minimize printing.Security: The sheath is attached directly to your belt and the thick, tough leather secure the knife very tight fit in the sheath. The sheath cover most of the knife except the handle butt to avoid the knife falling out.Durability: A custom leather sheath is not only stylish design but also can remain durable and dependable for years to come. Skillful, experienced craftsmanship and high-grade materials can deliver years of reliable service.Descriptions:The sheath was wet molded with the real Buck 112 (with Clip Point Blade), so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The belt loop fit belts up to 1.5 inches (38mm) wide. The 2 -3/8” width belt loop keep the sheath tightly to the belt to avoid of moving around and quickly drawing the knife.The sheath was made with 6-8oz (2.5-3.2mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy tannery). We always use full-grain leather, the strongest and most durable leather to make sheaths and holsters. It help the sheaths and holsters last for years.Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch technique, double stitch at the end points for strength and durability. Leather flesh-side (back side) is treated with special wax for smooth drawing. Edges beveled and burnished.The color of the sheath are available in:Brown (Old-school Hand-dyeing Medium Brown)Dark Brown (Chocolate)We hand dyeing with leather dye agents from Fiebings (USA) and Kenda Farben (Italy). Product colors may slightly vary due to photographic lightings or your display monitor settings. Also the hand dyeing process make the sheath stylish and unique appearance.Note:We are selling the leather sheath only, the Buck 112 Ranger is NOT included.This sheath designed to fit Buck 112 Ranger Clip Point Blade.Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Australia Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you!Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and your interesting of my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Custom Left Handed Scout Carry Leather Sheath for Buck 112 Ranger Read More »
Handmade Horizontal Leather Sheath for Buck 110 Folding Knife. This custom scout carry leather sheath allows to comfortably horizontal carry the Buck 110 Folding Hunter in many different positions in your belt: Appendix Carry (1-2 o’clock, above you right front pocket), Hip Carry (3 o’clock) Back Carry or SOB Carry. The sheath designed for Right-Handed, but the Left-Handed can use it as Cross Draw Carry Scout carry is a great way for daily carry, it’s comfortable, concealable, quick accessibility, easy to draw the knife when needed. The belt loop fit belts up to 1.5 inches (40 mm) wide. The sheath was wet molded with the real Buck 110, so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The sheath was made with 7-8 oz (3-3.2 mm) vegetable-tanned cowhide leather. We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Edges beveled, smoothed and burnished. The color of the sheath is Black, we use Toledo Super Black Leather Dye from Kenda Farben, Italy. Note: We are selling the leather sheath only, the Buck 110 Folding Hunter is NOT included.This sheath designed to fit Buck 110 Clip Point Blade Hunter.Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Aus Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you!Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and your interesting of my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Custom Black Scout Carry Leather Sheath for Buck 110 Folding Hunter Read More »
The sheath was wet molded with the realVictorinox / Wenger RangerGrip, so it fit perfectly to the knife, keep the knife stay tightly and safely in the sheath. Ergonomic designed to be worn in your left-side waist-line, in front of non-dominant hip (10-11 o’clock position).
Custom Cross Draw Leather Sheath for SAK Victorinox RangerGrip 78/ 79/ 178/ 179 Read More »
This custom Horizontal leather sheath has designed as a left handed sheath, it can be used it as Cross Draw Carry , and to be worn in the right front side, 1-2 o’clock position.Horizontal carry is a great way to carry your folder, it’s comfortable, concealable, quick accessibility, easy to draw the knife when needed.The belt loop fit belts up to 1.5 inches (4.0 mm) wide.The sheath was wet molded with the real Buck 112, so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The sheath was made with 6-8 oz (2.5-3.2 mm) high-grade vegetable-tanned cowhide leather. We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for yearsHand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Edges beveled, smoothed and polished. The color of the sheath are available in:Brown (Medium Brown, old-school hand-dyeing)Dark Brown (Dark Chocolate)Black.We use Medium, Dark Brown and Black Leather Dye from Fiebings (USA) and Kenda Farben (Italy). Actual product color may slightly vary due to photographic lighting and/or the display monitor setting. The hand-dyeing also make each sheath a stylish and unique appearance.Note:We are selling the custom leather sheath only, the Buck 112 Knife is NOT included.This sheath designed to fit Buck 112 Clip Point Blade Knife.Shipping: This is International shipping from Vietnam, the shipping will be processing by Ebay’s Carrier Agent in Vietnam. The International shipment may be a subject of customs processing and required an extra time. US: Shipping time is around 8-15 business days. UK, EU, Canada and Australia: Shipping time is around 12-20 business days.Worldwide: Shipping time is around 15-25 business days.Please consider for Overseas shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for your visiting and interested in my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Buck 112 Ranger Sheath | Custom Horizontal Leather Sheath | Left Handed Sheath Read More »
The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife easily, especially in Back Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily.
Custom Black 45 Degree Canted Leather Sheath for Buck 110 Folding Hunter Read More »
It can also be used for 111mm Victorinox versions as Custom Canted Leather Sheath for 111 mmVictorinox Swiss Army Knife 111mm One Hand Soldier 08. This custom handmade leather sheath allows to comfortably carry theVictorinox Swiss Army Knife 111mm One Hand Soldier 08 in various positions along your waist-line (right-handed): Hip carry (Strong side – 3 o’clock), Back Carry (4-5 o’clock), Appendix carry (1-2 o’clock).
Custom Leather Sheath for Victorinox Soldier 08 or similar 111mm versions Read More »
Custom horizontal sheath for Buck 110 Hunter FoldingThis Buck 110 sheath is designed as horizontal carry sheath, to be worn as: Appendix Carry (1-2 o’clock position), Strong-side/Hip Carry (3 o’clock position) or Back Carry (4-5 o’clock position)This sheath is specialized design for Buck 110 Auto and/or Buck 110 with the Thumb Stud for One-Hand Opening. It also fit Buck 110 drop point blade version. Comfortable: The sheath just sit along your waist-line, even if you’re driving or sitting down by the table, you may not feeling that your are carrying a knife sheath. Fast accessibility: To be worn in strong side, easy and fast access for quick draw the knife when needed, even in seated position. It will be a good choice for Buck 110 Auto and/or Buck knife with Thumb-Stud Concealable: the sheath sitting tight against your body along the waist-line, the style adds rigidity and helps minimize printing. Security: The sheath is attached directly to your belt and the thick, tough leather secure the knife very tight fit in the sheath. Durability: A custom leather sheath is not only stylish design but also can remain durable and dependable for years to come. Skillful, experienced craftsmanship and high-grade materials can deliver years of reliable service. Descriptions: The sheath was wet molded with the real Buck 110 (with Clip Point Blade), so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The belt loop fit belts up to 1.5 inches (38 mm) wide. The 2 -3/8” width belt loop keep the sheath tightly to the belt to avoid of moving around and quickly drawing the knife. The sheath was made with 6-8 oz (2.5-3.2 mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy tannery). We always use full-grain leather, the strongest and most durable leather to make sheaths and holsters. It help the sheaths and holsters last for years. Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Leather flesh-side (back side) is treated with special wax for smooth drawing. Edges beveled and burnished. The color of the sheath are: Brown Dark Brown (Chocolate) Black. We use Medium, Dark Brown and Black Leather Dye from Fiebings (USA) and Kenda Farben (Italy). Product color may slightly vary due to photographic lighting or your display monitor setting. Also the hand dyeing make the sheath stylish and unique appearance.Note: We are selling the leather sheath only, the Buck 110 Hunter is NOT included. For security purposes, avoiding the knife falling out of the sheath, we make the sheath very tight-fit. You may need some effort when draw the knife Shipping: This is International shipping from Vietnam, the shipping will be processing by Ebay’s Carrier Agent in Vietnam. The International shipment may be a subject of customs processing and required an extra time. US: Shipping time is around 8-15 business days. UK, EU, Canada and Australia: Shipping time is around 12-20 business days.Worldwide: Shipping time is around 15-25 business days.Please consider for Overseas shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. For more information, please feel free to contact us at anytimeThank you for visiting and interested in my handicrafts. Proudly made by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Buck 110 Hunter Sheath | Custom Horizontal Carry Leather Sheath | Sheath Only Read More »
When you hear the words “Swiss Army Knife”, chances are you think of the legendary Officer’s knife. Crafted in beautiful walnut scales, the Ranger Wood 55 from Victorinox stands out due to its elegant and durable walnut scales. Custom Cross Draw Leather Sheath for Victorinox Ranger Wood 55 will helps you to convenient and comfortable everyday carry your legendary SAK tool. Ergonomic designed to be worn in your left-side waist-line, in front of non-dominant hip (10-11 o’clock position) Features: Comfortable: The sheath just sit along your waist-line, even if you’re driving or sitting down by the table, you may not feeling that your are carrying a knife sheath. Fast accessibility: To be worn in front of non-dominant hip (left hip), very easy and fast access for quick draw the knife when needed, even in seated position. Concealable: the sheath sitting tight against your body along the waist-line, the style adds rigidity and helps minimize printing. Security: The sheath is attached directly to your belt and the thick, tough leather secure the knife very tight fit in the sheath. The sheath cover most of the knife except the handle butt to avoid the knife falling out. Durability: A custom leather sheath is not only stylish design but also can remain durable and dependable for years to come. Skillful, experienced craftsmanship and high-grade materials can deliver years of reliable service. Descriptions: The sheath was wet molded with the real Ranger Wood 55, so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The belt slots fit belts up to 1.5 inches (38 mm) wide. The sheath was made with 7-8 oz (2.7-3.2 mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy tannery). We always use full-grain leather, the strongest and most durable leather to make sheaths and holsters. It help the sheaths and holsters last for years. Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Leather flesh-side (back side) is treated with special wax for smooth drawing. Edges beveled and burnished. Color: Brown, Dark Brown, Black We hand dyeing using Medium, Dark Brown and Black Leather Dye from Fiebings (USA) and Kenda Farben (Italy). Product color may slightly vary due to photographic lighting or your display monitor setting. Also the hand dyeing make the sheath stylish and unique appearance. Note: We are selling the leather sheath only, the Victorinox Ranger Wood 55 is Not included. Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Aus Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Victorinox SAKs: Belt loop, Clip-on, Scout (horizontal) carry, Cross Draw… to meets the demands of various clients. For more information, please feel free to contact us at anytime Thank you for visiting and your interesting in my handicrafts. Proudly made by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Custom Cross Draw Leather Sheath for Victorinox Ranger Wood 55 Read More »
Custom Canted Pancake Leather Sheath for SAK Victorinox Hunter Pro Alox This custom leather sheath allows to comfortably carry the Victorinox Hunter Pro Wood (One-hand opening blade version but it can be use for Two-hand opening blade versions) in various positions (right-handed): Hip carry (Strong-side – 3 o’clock), Back Carry (4-5 o’clock), Appendix carry (1-2 o’clock).Ergonomic designed with cant angle is 45º (tilt forward).The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife quickly and easily, especially in Back or Hip Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily. It is suitable for outdoor operations or driving because the sheath not jam too much to you body or car seat while running or driving.Belt slots fit belts up to 1,5 inches (40mm) wide.The sheath was wet molded with the real Victorinox Hunter Pro Alox, so it fit perfectly to the knife, keep the knife stay tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The sheath was made with 6-8oz (2.5-3.2m) vegetable-tanned cowhide leather (Vachetta leather from Italy tanneries). We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years.The color is Brown, Dark Brown (Dark Chocolate), Light Brown (cognac) and Black.We hand-dyeing the leather use Leather Dye Agents from Fiebings (USA) and Kenda Farben (Italy) Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques for durability. Edges beveled and burnished.All the sheath are finished with Leather Conditioner / Natural Beeswax / Sno-Seal for weather-resistant strengthen.Note: We are selling the leather sheath only, the Victorinox Hunter Pro Alox is NOT included.Product color may slightly vary due to photographic lighting and display monitor setting. The hand-dyeing process also make the sheaths stylish looking and unique appearance.Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-15 business days (2-3 weeks). The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-10 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Aus Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you!Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for SAK Victorinox / Wenger Swiss Army Knives as 130 mm Ranger Wood, Ranger Grip 78,79,178,179, 111 mm Soldier, Trekker…, Hunter Pro… with many sheath types: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, canted sheaths… to meets the demands of various clients. If you need any information, please feel free to contact us at anytime Thank you for visiting my store!Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Custom Canted Leather Sheath for SAK Victorinox Hunter Pro Alox [Sheath Only] Read More »